[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] 833A Tube



Hi jim, Dave, 
Thanks. I am planning to build my first VTTC and chose to use Steve wards single 833a design. After seeing the $200 price for the tube I almost scraped the idea. I can handle $90 for a tube. All the caps are going to set me back as it is. I have two MOT's set aside for this project. I also have some 1400pF 20Kv doorknobs from a laser project, does anyone know if these will work for a VTTC? 

Rob. 


________________________

On 2009-01-28 23:38:09 -0700 Jim Mora <wavetuner@xxxxxxxxx> wrote:

> 
> Negative, check RF parts for new Taylor 833a's on special for $89.00. Try to
> find some 833C which have a carbon and more robust plate. So I have have
> been told anyway.
> 
> http://www.rfparts.com/tubetran_specials.html These are new. Anyone know
> where Taylor tubes are made? I had two of them but sold them and found 4
> pulls on Ebay. 
> 
> Jim Mora 
> 
> When I build the quad I'll use the pulls to get in the ball park and then if
> funds allow I'll buy 4 833C's. This won't be for some time.
> 
> -----Original Message-----
>  From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
> Of Robert Byron
> Sent: Wednesday, January 28, 2009 6:51 PM
> To: Tesla List
> Subject: [TCML] 833A Tube
> 
> 
> Are these things really that expensive? 
> http://store.tubedepot.com/nos-833a.html
> Can anyone get one cheaper?
> 
> Rob._______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
> 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla