[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Hammertone "Predikter" 1st. light



I am new to the list but have been reading quite a bit.
I am currently building a medium sized coil and was wondering about your
torroid on the "Thumper" coil
As viewed on "You Tube"
Do you have any close up pictures or CAD drawings of the framework used with
this design.
I have a tube roller and full machine shop and would like to pursue this
design concept. 
Thanks for any help or advise

Joe Korick

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Finn Hammer
Sent: Monday, July 06, 2009 1:04 PM
To: Tesla Coil Mailing List
Subject: [TCML] Hammertone "Predikter" 1st. light

All,

An experimental coil equipped with The Hammertone Predikter driver had first
light this weekend.

At 600Volts into the bridge, and just shy of 2kA, 200uS on time the coil
crossed the 10 feet barrier.

http://www.youtube.com/watch?v=-kg9JPKhWg8

Cheers, Finn Hammer
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla