[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Scientific Method



Anyone attend Tesla Fest 2009 can see the 1 Hy inductors for themselves.  We
use them in our Marx generators, and will have a 600 kV unit in operation.

They  can also see a few of our large coils in operation with silver tinned
wire, fine stranded.

As for the large coil down south, I've already clearly stated my reasons for
not showing photos of it (like getting sued).  My legal contract with my
client protects his desire to remain annonomous, and I will respect that
agreement which I signed.



Dr. Resonance




On Mon, Jul 27, 2009 at 2:29 PM, Drake Schutt <drake89@xxxxxxxxx> wrote:

>
>
>>
> See my message below, edited as per moderator's advice:
>>
>>
>>> I would like to piggy back on what Herr Zapp has said.  Last night I read
>>> a passage in a book about Werner Heisenberg, noted quantum physicist.  His
>>> approach to the mysteries of quantum mechanics was to forget all of the
>>> previous suppositions about atoms and build this new field of physics SOLEY
>>> on reliable experimental data.  I think that this is a very good approach to
>>> anything.  Heck, there is a lot of such data scattered across pupman,
>>> hotstreamer, and the Internet at large.  It just needs to be consolidated.
>>>
>>> Anyway, while DC has been coiling probably for longer than anyone on the
>>> list, his word should not be taken as the gospel truth (not that he implys
>>> it is, he just gives a lot of advice).  He has done much to advance our
>>> hobby from selling discounted transformers and capacitors, to giving away
>>> various schematics, and especially hosting an annual teslathon.
>>>
>>> Just my $0.02,
>>> Drake
>>>
>>> P.S.
>>>
>>> This post is not meant to be defamitory at all to DC Cox.  He has just
>>> made some extraordinary claims in the past that have not been backed up with
>>> real evidence (70 foot coils in australia, super small inductors, silver
>>> plated secondaries....)
>>>
>>> On Jul 26, 2009, at 9:00 AM, quarkster@xxxxxxx wrote:
>>>
>>>
>>>>
>>>> DC -
>>>>
>>>> I think you may not have read this entire email string. One poster
>>>> suggested evaluating a secondary coating material that may not have been
>>>> previously tried; a responder questioned whether it was worth the "risk" to
>>>> evaluate anything new or untried, since suitable coating materials are
>>>> already known.
>>>>
>>>> My point was to ENCOURAGE experimentation and evaluation  of new
>>>> materials and processes, accepting the fact that the path to a significant
>>>> success may be paved with minor failures.
>>>>
>>>> Additionally, I questioned whether there was any reliable test data that
>>>> conclusively showed  Dolph's AC-43 to be any better FOR INSULATING TESLA
>>>> COIL SECONDARYS than less expensive, more commonly used, and more readily
>>>> available coatings.
>>>>
>>>> Are you able to provide any such test data that would show the
>>>> superiority of AC-43? If not, there's no shame, just say that you have no
>>>> supporting data. Perhaps someone else may be able to take the time to
>>>> perform controlled experiments that could yield useful data.
>>>>
>>>> My only caution about using Dolph's AC-43 as a coating for Tesla coil
>>>> secondary coils is the fact that it contains up to 25% by weight of xylene,
>>>> a very aggressive aeromatic solvent. Any Tesla coil secondary wound on a
>>>> plastic former (PVC pipe, acrylic or polycarbonate tube, etc) is at risk of
>>>> solvent-induced cracking or crazing caused by exposure to the xylene.
>>>> Cardboard forms would not be at risk.
>>>>
>>>> Remember that Dolph's AC-43 is designed specifically for impregnating
>>>> motor and transformer windings, which (aside from Nylon coil bobbins) don't
>>>> contain the types of plastics most commonly used for secondary coil forms in
>>>> Tesla coils.
>>>>
>>>> If you'd like to "help" Tesla coil builders on this forum, why not
>>>> provide data that would help support some of your claims for "performance
>>>> enhancement"? Like the silver-plated secondary wire: Is there any DATA to
>>>> back this up, or just an opinion, along with the observation that Tesla
>>>> coils built with silver-plated wire can produce sparks. Or Dolph's AC-43; is
>>>> there any data showing that this is "the best" possible coating, or is this
>>>> just an opinion, along with the observation that tesla coils built with
>>>> Dolph's can produce sparks?
>>>>
>>>> I think Terry Fritz started a real revolution in Tesla coil design and
>>>> construction years ago when he tried to get everyone thinking in terms of
>>>> analyzing real data, and not just relying on tradition, word-of-mouth, or
>>>> what happened to work well on one coil, without understanding the underlying
>>>> reasons WHY something worked.
>>>>
>>>> I think Terry's approach to analyzing and understanding Tesla coils has
>>>> proven itself over and over.
>>>>
>>>> Regards,
>>>> Herr Zapp
>>>>
>>>>
>>>>
>>>>
>>>> --- On Sat, 7/25/09, DC Cox <resonance@xxxxxxxxxxxx> wrote:
>>>>
>>>>
>>>> From: DC Cox <resonance@xxxxxxxxxxxx>
>>>> Subject: Re: [TCML] sealing a cardboard form
>>>> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
>>>> Date: Saturday, July 25, 2009, 11:26 PM
>>>>
>>>>
>>>> Certainly, there are definitely alternatives.  Polyurethane will flake
>>>> off
>>>> especially if it is subjected to any heating/cooling cycles.  Epoxies
>>>> are
>>>> great if you get the mixture perfect, if not, sometimes they never
>>>> completely cure and remain tacky.
>>>>
>>>> I've built approx 250 coils using AC-43, some in operation for over 30
>>>> years
>>>> without any breakdown.
>>>>
>>>> You also have to consider it's used on HV transformers, approx 250 built
>>>> on
>>>> a daily basis in USA.
>>>>
>>>> Their industry wide reputation is such that it not questionable, just
>>>> solid
>>>> engineering.  It's used by over 70 transformer manufacturers in the USA
>>>> alone.  Perhaps many more worldwide.
>>>>
>>>> If you need further proof, just call Dolph's and they will email you the
>>>> engineering data.
>>>>
>>>> Yes, someone certainly could do the work of winding several coils, then
>>>> test
>>>> them for breakdown, but this usually requires time and money.  Also,
>>>> expensive test instruments
>>>> to make the correct measurements in a precise fashion.
>>>>
>>>> As usual, your "suspicions" are out of line, and certainly not in the
>>>> spirit
>>>> of this forum.  I try to help experimenters, not be overly critical of
>>>> their
>>>> work or efforts.
>>>>
>>>> Dr. Resonance
>>>>
>>>>
>>>>
>>>>
>>>> On Sat, Jul 25, 2009 at 1:39 PM, <quarkster@xxxxxxx> wrote:
>>>>
>>>>
>>>>> Dave -
>>>>>
>>>>> I would venture an educated guess that very, VERY few Tesla coils have
>>>>> actually been built using the expensive Dolf''s varnish as a secondary
>>>>> overcoat. Based on closely monitoring this list for nearly ten years,
>>>>> attending a fair number of Teslathons, and coresponding with scores of
>>>>> TC
>>>>> builders over the years, I estimate that for operating amateur-built
>>>>> TC's of
>>>>> all sizes, the "real numbers" for secondary overcoatings may look
>>>>> something
>>>>> like this:
>>>>> 1. No secondary overcoating at all;
>>>>> 2. Clear varnishes of all types, including oil and water base types
>>>>> (most
>>>>> commonly polyurethane, but also good old fashoned marine spar varnish,
>>>>> etc);
>>>>> 3. Two-part epoxy materials;
>>>>> 4. Dolph's AC-43, "Glyptal", and other types of  commercially-sold
>>>>> "corona
>>>>> dope" insulating coatings.
>>>>>
>>>>> I think that a very interesting experiment would be to wind at least 5
>>>>> identical secondary coils, coat 4 of them with the most commonly used
>>>>> insulating material, and then subject them to ever-increasing
>>>>> electrical
>>>>> stress in a large bang-size coil, gradually increasing coupling until
>>>>> insulation failure (racing sparks, turn-turn arcing, etc.) occurs.
>>>>>
>>>>> I'm strong proponent of evaluating new processes and materials in an
>>>>> attempt to improve the technology. Successful evaluation means pushing
>>>>> the stress levels to the threshold of failure, and beyond. If someone
>>>>> is
>>>>> willing to take the time to evaluate new "stuff", and understands that
>>>>> this
>>>>> unavoidably includes the risk of failure, then let's not dissuade them
>>>>> from
>>>>> trying.
>>>>>
>>>>> If a small-to-medium size secondary fails this testing, what's the
>>>>> cost? At
>>>>> max, $20 or so of magnet wire, $10 worth of PVC pipe, and a few hours
>>>>> of
>>>>> labor, it's not terribly significant.
>>>>>
>>>>> If DC Cox (or anyone else) has spent lots of time and money
>>>>> functionally
>>>>> evaluating multiple kinds of other secondary insulating materials
>>>>> before
>>>>> finally selecting Dolph's AC-43 as the very best, then I invite him to
>>>>> share
>>>>> this interesting and useful data with the TCML.
>>>>>
>>>>> Personally, I suspect that DC read some Dolph's advertising claiming
>>>>> that
>>>>> it was "good for high voltage applications", found that he could make a
>>>>> profit by re-packaging and re-selling this product at a markup, and
>>>>> thereby
>>>>> claims that it is "the best material" for insulating  TC secondary
>>>>> coils.
>>>>>
>>>>> If there really IS comparative test data, developed under controlled
>>>>> conditions, that shows the clear superiority of Dolph's for this
>>>>> specific
>>>>> application, then let's see it.
>>>>>
>>>>> I happen to prefer two-part epoxy for coating secondary coils, and I
>>>>> have a
>>>>> number of very specific reasons for this preference (that I have shared
>>>>> with
>>>>> the TCML over the years through several detailed posts). However, I do
>>>>> not
>>>>> have side-by-side test data comparing epoxy with other materials, so I
>>>>> cannot prove it's superiority on all possible evaluation criteria. And
>>>>> no, I
>>>>> don't sell any epoxy coatings of any kind.
>>>>>
>>>>> Regards,
>>>>> Herr Zapp
>>>>>
>>>>> --- On Fri, 7/24/09, Dave Halliday <dh@xxxxxxxxxxxxxx> wrote:
>>>>>
>>>>>
>>>>> From: Dave Halliday <dh@xxxxxxxxxxxxxx>
>>>>> Subject: RE: [TCML] sealing a cardboard form
>>>>> To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
>>>>> Date: Friday, July 24, 2009, 11:19 PM
>>>>>
>>>>>
>>>>> A couple of comments inline:
>>>>>
>>>>> -----Original Message-----
>>>>>> From: tesla-bounces@xxxxxxxxxx
>>>>>> [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of PAUL THOMPSON
>>>>>> Sent: Friday, July 24, 2009 3:36 PM
>>>>>> To: Tesla Coil Mailing List
>>>>>> Subject: Re: [TCML] sealing a cardboard form
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "DC Cox" <resonance@xxxxxxxxxxxx>
>>>>>> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
>>>>>> Sent: Friday, July 24, 2009 4:20 PM
>>>>>> Subject: Re: [TCML] sealing a cardboard form
>>>>>>
>>>>>>
>>>>>> A Tesla coil secondary coilform is subjected to very high potential
>>>>>>> stresses.  Why not just use a product especially developed
>>>>>>>
>>>>>> to seal high
>>>>>>
>>>>>>> voltage transformer windings?
>>>>>>>
>>>>>>
>>>>>> Because improvisation and learning is why I do this. If I
>>>>>> want a perfect
>>>>>> secondary, I can buy one. But why bother?
>>>>>>
>>>>>
>>>>>
>>>>> How many hours do you want to spend to find out that your 'great idea'
>>>>> was
>>>>> an engineering rathole and that your time and materials have been
>>>>> wasted.
>>>>> There are a lot of people offering advice here and the reason that
>>>>> people
>>>>> keep coming back to specific things is that they have been tested by
>>>>> the
>>>>> community and have been found to work the best.
>>>>>
>>>>> MMC's, specific coatings, designs for spark gaps, etc...
>>>>>
>>>>>
>>>>>
>>>>>>
>>>>>> Dolph's AC-43 is one such liquid especially designed with
>>>>>>>
>>>>>> high dielectric
>>>>>>
>>>>>>> resistance, and anti-tracking properties.
>>>>>>>
>>>>>>
>>>>>> Do you sell this stuff or what?
>>>>>>
>>>>>>
>>>>> He probably does but I would doubt that he makes a lot of money off of
>>>>> it.
>>>>> This is especially a factor considering just how many gallons of other
>>>>> paints / varnishes / coatings / etc... he probably tried out before he
>>>>> found
>>>>> that Dolph's worked the best.
>>>>>
>>>>>
>>>>> I would hate to see the number of 5-gallon tubs of very expensive stuff
>>>>> he
>>>>> has with just a couple pints taken out and a faint "Oh Snap!" still
>>>>> hanging
>>>>> in the air.
>>>>>
>>>>>
>>>>>
>>>>>>> You certainly can take a chance with other products, but if
>>>>>>>
>>>>>> they don't do
>>>>>>
>>>>>>> the job then you have to completely replaced the coilform
>>>>>>>
>>>>>> and rewind the
>>>>>>
>>>>>>> coil.
>>>>>>>
>>>>>>
>>>>>> We learn by doing.
>>>>>>
>>>>>>
>>>>>
>>>>> Or by watching other people doing the same thing and learning from
>>>>> their
>>>>> mistakes.
>>>>>
>>>>>
>>>>> Set RANT=off
>>>>>
>>>>> Cheers!
>>>>> Dave
>>>>>
>>>>> _______________________________________________
>>>>> Tesla mailing list
>>>>> Tesla@xxxxxxxxxxxxxx
>>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>>> _______________________________________________
>>>>> Tesla mailing list
>>>>> Tesla@xxxxxxxxxxxxxx
>>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>>>
>>>>> _______________________________________________
>>>> Tesla mailing list
>>>> Tesla@xxxxxxxxxxxxxx
>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>> _______________________________________________
>>>> Tesla mailing list
>>>> Tesla@xxxxxxxxxxxxxx
>>>> http://www.pupman.com/mailman/listinfo/tesla
>>>>
>>> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla