[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] final word on inductance



This equation works perfectly on a theorectical coil.

In the real world thermal effects, capacitive changes, resistive changes,
etc. in the sec coil will all change the required zero point firing point in
the primary circuit.

Dr. Resonance




On Thu, Jun 25, 2009 at 9:19 AM, <sparks@xxxxxxxxxxxxxx> wrote:

> > > L (inductance)  =  Volt seconds/ Amperes
> > >
> > > The bottom line is really (volt seconds/Amps) - - -  change
> > either one and the inductance changes.  Period.
>
> The ratio of Vsec/A is dependent on the value of inductance, not the
> other way around.  No matter what the value of voltage applied to the
> inductor, the ratio will stay the same, unless you change the inductance
> or the ferromagnetic core saturates.
>
> 73,
>
> Ralph   W5JGV - WD2XSH/7
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla