Re: [TCML] 1 Mhz ,1 kw

[johnbrooks@xxxxxxxxxxx]

....so basically it boils down to the capacitor?

Is there a configuration to use the 94C20P15K,,,

as this is the current most used cap?

j.


On Sat, 21 Mar 2009 18:17 -0700, "bartb" <bartb@xxxxxxxxxxxxxxxx> wrote:
> Lau, Gary wrote:
> > Capacitor dielectric losses and inductor skin-effect and proximity-effect losses will be significantly higher at 1 MHz.
> > Regards, Gary Lau
> > MA, USA
> I want to point out that in the example coil I handed out, AC losses 
> (both skin and proximity were accounted for at 1MHz) are 10 times 
> 'lower' than a 1000 turn coil of the same geometry. If one were to use 
> the same wire size as a 1000 turn coil and simply make the coil smaller 
> to get the coil at 1MHz, then yes. But those losses can be canceled 
> should an experimenter desire to eliminate them from the data. 
> Dielectric losses are different and cannot be eliminated.
> 
> Take care,
> Bart
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
-- 
  
  johnbrooks@xxxxxxxxxxx

-- 
http://www.fastmail.fm - The way an email service should be

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla