[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Considering a new coil build...



Or you could just buy this:
http://cgi.ebay.com/MAXWELL-LABS-40kv-09uf-HI-VOLTAGE-CAPACITOR-TESLA_W0QQitemZ190296005944QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item190296005944&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

This is what I use on a 10Kva 14.4Kv coil.

Dave
Pleasanton, ca

I'm starting to think that a real pulse cap might be the way to go. Dr.
Resonance has emailed me some information on an amazing cap that would be
great. It's a little expensive though, so I'm going to have to save up for a
while. I was going to build the MMC for a lower voltage, as I think I did
24kV with a 15kV NST. But thinking about it, I can see that isn't going to
work. I'd be really irritated if I blew up my MMC after soldering all that
together.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla