[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Dual 14400 5KA



Hi DC,

Would you be able to share you plans or are they proprietary. It not that
much to step up to a 24" from a 22". 22" is special order near me. I think I
would need one of your un-potted 10KVA pigs though unless someone has a
10KVA on the west coast for sale.

Regards,
Jim Mora

-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of DC Cox
Sent: Friday, May 15, 2009 10:48 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Dual 14400 5KA

You can run the 5 kVA unit up to 12 kVA on short TC duty cycles.

BTW, I have plans for a nice coil using 24" dia sonotube.  14-15 ft sparks
at 18 kVA.

DC




On Thu, May 14, 2009 at 8:16 PM, Jim Mora <wavetuner@xxxxxxxxx> wrote:

> Hi Group,
>
>
>
> I have a nice PT 14400 5KVA installed in a cabinet. I recently acquired a
> 14400 5KV smallish pig. I am finishing my 12" coil. The next one will
> likely
> be a 22" sonotube (I'll coat it when it gets really hot and dry here and
> put
> it in the garage off the floor for next spring.
>
>
>
> My question is can I parallel these without any perceived problems? I
don't
> understand BIL ratings or the transformer impedance rating too well. Will
> these unknowns come back to haunt me?
>
>
>
> Thanks,
>
> Jim Mora
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla