[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Terry Filter



I have no idea. The legend on my drawing shows 12 movs for a 9kv nst,14 movs for a 12kv ;nst, and 16movs for a 15kv nst. I can only assume that your drawing would provide a greater safety factor. ----- Original Message ----- From: "Paul Brodie" <pbbrodie@xxxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Thursday, November 05, 2009 10:01 PM
Subject: Re: [TCML] Terry Filter


My drawing shows 9 MOV's on each side. Why the discrepancy?
Paul
Think Positive

----- Original Message ----- From: "Dan Casaregola" <ag2z@xxxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, November 05, 2009 6:38 PM
Subject: [TCML] Terry Filter


I'm in the process of building a filter for my 15k/30ma NST, and the drawing I have shows the number of MOVs required for the stated voltage, but it only shows 6 MOV. either side of center tap ground. I remember reading somewhere that the number of caps should be the same as the number ov MOVs. Is this correct? Thank you Dan
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla