[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Scoping Quench



10X is surely not nearly enough for the voltage.

And really, can you safely ground one side of your HV output anyway?

If i were to do it, id use a wide band-width current transformer with a big
opening and really insulate the heck out of it with layers of plastic tubing
around the wire.  Measuring the current with such a transformer (usually
made by Pearson) would be just as valuable as measuring the voltage, yet
would be FAR safer!

This measurement is not to be taken lightly.

Steve

On Fri, Nov 20, 2009 at 7:03 PM, G Hunter <dogbrain_39560@xxxxxxxxx> wrote:

> What's the best way to observe primary circuit performance of a SGTC using
> an oscilloscope?  I'm not interested in secondary ring down.  I want to see
> if my spark gap is quenching.  Should I use a regular 10X probe?  If so,
> what should I probe? (I'm keenly aware of the high voltage hazard).
>
> Cheers,
>
> Greg
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla