[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] pulse caps for large DRSSTC



I have already tested them in DRSSTC service.  They work excellent.  We
checked thermal rise with an infrared camera.  No problems after continuous
10 minute runs.

They are comprised of series sections and parallel sections to spread out
the thermal load over a large area.

Dr. Resonance




On Thu, Sep 17, 2009 at 4:25 PM, Dave Leddon <dave@xxxxxxxxxx> wrote:

> Dr. Resonance,
> If you would be willing to provide to me, free of charge, a sample of each
> one of these capacitors, I would be willing to verify their applicability to
> DRSSTC service.  Failing that, I would be willing to join a group buy,
> should some generous soul be willing to set it up (i.e., somebody other than
> me).
> Dave
>
>
> At 09:32 AM 9/17/2009, you wrote:
>
>>  I carry high-Q factor heavy duty pulse caps for medium and large size
>> DRSSTCs.
>>
>> SSCAP-200 measures 3 3/4" x 5" x 11" and is very conservatively rated 0.8
>> uF
>> (800 nF) at 20 kV WVDC.
>>
>> SSCAP-400 measured 3 3/4" x 5" x 11" and is conservatively rated 1 uF at
>> 20
>> kV WVDC.
>>
>> Designed for continuous operation at 12 kV DC in H-bridge configuration.
>>
>> Contact me off-list for further information.  If someone assembles a
>> "group
>> buy" I can provide pricing around $390 per cap.
>>
>> Dr. Resonance
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla