[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Paint....Re: [TCML] Fan Shroud Toroid



Can you provide any information, name, manufacturer, cost..., about this graphite spray paint. I would like to look into getting some. Thanks.
Paul
Think Positive

----- Original Message ----- From: "DC Cox" <resonance@xxxxxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Tuesday, August 03, 2010 10:05 PM
Subject: Re: Paint....Re: [TCML] Fan Shroud Toroid


I have some specially formulated with graphite and they work great.  I've
used them on both Tesla and Van de Graaff toploads.

Dr. Resonance





On Mon, Jul 19, 2010 at 10:43 AM, dave pierson <dave_p@xxxxxxxxxxx> wrote:


>> Q. " what do you think about using metallic spray paint to achieve
>> conductivity in the form?"

> A. Highly unlikely that would work with most rattle-can finishes.

> Spray paints are mostly comprised of acrylics or laquers and
> regardless of their aluminum flake content would not be very
> conductive at all.

  Disclaimer:
  Its been years wince i was current in this area, but:

  When i was, there were _specific_ formulations for
  EMI/RFI/ESD work.  They were 'high(ish) resistance', by
  design...  If someone has some working in HV work, fine,
  but I'd expect sprayons to not work.

  The originally proposed fan shrouds seem intriguing, tho..

best
New dwp:     dave_p@xxxxxxxxxxx
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla