[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Toroid height, What's best



How?

Regards
Phil

www.hvtesla.com


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Dex Dexter
Sent: 24 February 2010 19:37
To: Tesla Coil Mailing List
Subject: RE: [TCML] Toroid height, What's best


So what?
You can compensate for shorted turn effect.

Dex


 
--- phil@xxxxxxxxxxx wrote:

From: "Phil Tuck (hvtesla)" <phil@xxxxxxxxxxx>
To: "'Tesla Coil Mailing List'" <tesla@xxxxxxxxxx>
Subject: RE: [TCML] Toroid height, What's best
Date: Wed, 24 Feb 2010 01:06:44 -0000

I have a 6 inch minor with the bottom 5.5 inches above the top of the
winding on my 8 inch. Runs on a pig with no problems. As I understand it you
get it as high as possible while still providing shielding. The lower it is
the more it acts like a shorted turn. My height was based on a
recommendation by Dr Res I thought.

Regards
Phil



_____________________________________________________________
Washington DC's Largest FREE Email service. ---> http://www.DCemail.com ---> A Washington Online Community Member --->
http://www.DCpages.com
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla