[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] A couple of questions



Paul,
Thanks for the help!
One question... I think I saw somewhere that a Bi-polar coil does not need a ground? Or does not need an earth ground?
Thanks,

On 2/22/2011 9:44 AM, mrapol@xxxxxxxxxxxx wrote:
Modestly I offer:

http://www.instructables.com/id/Tabletop-Tesla-Coil/

A bipolar tabletop model. You can email me with questions too.

Paul


----- Original Message ----- From: "B McPeak" <bmcpeak363@xxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, February 22, 2011 8:45 AM
Subject: [TCML] A couple of questions


Hello all,
Does anyone know of plans for a tabletop Bi-polar coil? I have found
lots of videos but not a lot of hard or modern info. I have the Boy
Electrician book plans. Suppose it could be modified. I would like to
build one with a cylindrical secondary, not cone shaped.
Also I know this has been asked before. I need to put in a ground rod
for my present coil. My concern is that any practical location is near
the mains ground and copper water lines or the ground cable would be
very long.Any suggestions would be appreciated.
Thanks,
--
Brad McPeak

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


--
Brad McPeak

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla