[TCML] the ir2110 mosfet driver chip for sstcs?

[earl rhodes <earl_1975@xxxxxxxxxxxxx>]

hi guys 
ive come across a driver chip for sstcs the "ir2110"and the rest of that particular set of chips ir 2112 ir2113
i have a few questions concerning thier use in sstc 
the chip sheet says they already have cycle by cycle shutdown protocols so im assuming i no longer need the flipflopclock circuit to control my shut down is this correct 
if this is correct i only need the one chip for it to work 
where my last board had a total of seven chips on it 
there was a 74hc14  a cd4013 a 74hco8 and four tc4420
that was without having any ocd on  the board 
i could get away with only the one and they are cheap from hong kong at around 150 each 
your input would be totally apreciated 
i have had some succes with my other board having about 5inch disharge  but i do keep blowing driver chips for no apparent reason  
so ive rebuilt a board ready to take the ir 2110 it will be a couple of weks before i get them, im totally skint at the moment and then when i do get them bought it will take a further two weeks for them to arrive so in the meantime i just thought id ask someone else if  im correct about this chip
heres a link to the data sheet
http://www.irf.com/product-info/datasheets/data/ir2110.pdf
if im totally off base its not unusual for me so let me have it 
thanks 
earl

 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla