[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] tesla coils



Hi Jason,
Dan used to wind secondaries to that spec for people for money at <easternvoltageresearch.com> You might get someone on the list here to do it for you, too. Mostly, though, you'll probably get advice on how to do it yourself. A small secondary like that is very much in the realm of something you could do as a first try. It's not that hard once you try it. On the toroids, there was someone on the list selling toroids of about that size last month. Check the TCML archives, and I know you can find them on eBay. Or, you could try Information Unlimited at <amazing1.com> Or who knows, someone may have an extra one here on TCML.
cheers,
Joe




On 11/8/2011 7:27 AM, jason hill wrote:
i was sent to this site by alan majernick.....i was hoping to possibly get a tesla coil built for a project that my partner and I are building. alan seems to be pretty busy w a "pesky" day job lol and thought that i may have a better chance finding someone to help me out on this site. we checked out coils on ebay and we were
wondering if there was any possible way to get a secondary made to our
specs? 3.5 in coilform
1200 turns, 26 awg
21 in winding length
also wondering about toroids.....?

TOROID
2"x8"
We are building a plasma arc speaker and would like to purchase a secondary rather than make our own.

please feel free to get back to me via email or by phone at 2076891199 for any questions or concerns. if you have any info on anyone that could make a coil if you cannot i would be very grateful for any info.


thank you for your time!

jason hill

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla