[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] wooden bobbin



Hey all,
     Still doing some research on making flyback transformers, I'm toying
with the idea of making a slotted bobbin to make a series pancake type
secondary, as it sound infinitely easier to wind, and I plan on making
several...  My question is can I use wood as a bobbin material, it should
be fairly easy to machine to my shape, and much cheaper than plastic, and I
figure it can just be soaked in wax or polyurethane or epoxy or something
to provide protection from the corona of the windings...  Probably a bad
idea, but what do you guys think, using wood in a transformer, royally bad
idea or no?

Scott Bogard.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla