[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Circuit breakers



Hmm, 

So I did some more digging and concluded that these are specialized circuit breakers. So getting a data sheet is going to be hard, I have an email into the company, but I am not holding my breath. 

I think you guys are right with the Ln its probably an In. It is still a little baffling that their appears to be 2 different values for voltage ratings. But these were on a 120V battery UPS so I am guessing that thats what they are rated for. 


Thanks for the assistance guys =), 
John "Jay" Howson IV 

----- Original Message -----
From: "Jim Lux" <jimlux@xxxxxxxxxxxxx> 
To: tesla@xxxxxxxxxx 
Sent: Friday, October 7, 2011 1:18:59 PM 
Subject: Re: [TCML] Circuit breakers 

On 10/7/11 9:20 AM, dave pierson wrote: 
> Took a Real Casual/quick look: 
> Ue shows up as rated voltage 
> Ln as Rated current. 
> 
> Now one may ask: waitaminnit, there seem to be TWO 
> different values for voltage and current? 
> 
> I'd expect this to be two different 'regulatory authorities' 
> defining things Slightly Differently. Could be wrong. 
> 
> The suggestion to hunt up the manufacturer's website is 
> well made, in my opinion. (I simply googled 
> 'Ue Ln Circuit Breaker'.) IF those are industry 
> standard abbreviations, likely show up elsewhere... 
> 

IEC markings, vs, say, UL. 

U and L are probably used to avoid confusion with something else (even 
though V and I would be the more expected letters, at least in English) 

There's a variety of subscripts for each for things like maximum 
interrupting current, trip current, etc. 


_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla