[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Metal ARSG disk?



On 1/7/12 4:38 PM, Gary Lau wrote:
It would definitely be mechanically safer, but now you have the added
challenge of insulating the now-hot disk from the motor shaft.  I'm not
saying it can't be done, but should that insulation fail, it would be
_BAD_.  But then, folks have done dumber stuff and lived to tell.


Belt driven with the rotary disk on a jackshaft makes insulation easier.

There's also schemes where the disk is grounded.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla