[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] MOTs



My 240/14,400 volt 25 kVA pig is aluminum. It's from the 70's and is bullet-proof.



________________________________
 From: Neon Tesla <neontesla@xxxxxxxxx>
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx> 
Sent: Sunday, July 29, 2012 4:39 PM
Subject: Re: [TCML] MOTs
 
          Oh No!
Someday we will even have to look out for aluminum pole pigs!
What's next?! Solid state pole pigs?! what is this world coming
to?!

On Sun, Jul 29, 2012 at 9:02 AM, SusaX2 X2 <susax2@xxxxxxxxx> wrote:

> Hi,
>
> I agree with Dave.
> MOT's nowadays have become very small and are all wound with aluminium
> wire.
> Even under oil these will burn out eventually.
> If you're going to buy second hand mircrowave ovens, look for the old ones.
> The older the better. Old style MOT's are bigger and wound with copper
> wire. And these are easier to disassemble if you want to remove the shunts.
>
> Mark
>
> 2012/7/28 jjr <jjr@xxxxxxxxxxxxx>
>
> > Hello list,
> > I am in need of 4 MOTs. Preferably they should all be 1100 watts and the
> > same make and model. They are for the construction of a power supply for
> an
> > experimental Coil. If anyone can help me please contact me off list.
> > Thanks,
> > jim
> > ______________________________**_________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/**listinfo/tesla<
> http://www.pupman.com/mailman/listinfo/tesla>
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
*Don't lower your expectations, raise the voltage !*
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla