[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] New (and possibly final) topload for MSB3 project.



I've given up all hope of being able to afford a spun aluminum
toroid topload for my coil anytime in the near future, but I
have found something that works just as well (compared to all
previous results).

Please draw your attention to the following diagram...
http://misc.msbministries.org/msb3topload.png

I found two old 9 inch pie pans in the back of the kitchen
cabinet, and the idea hit me to bolt them together, face
to face, with a threaded bracket inside, and this is what
I came up with.  It looks reasonably nice, and performs just
as well as the copper sphere I WAS using, but now I don't
have a padload of streamers hopping off the top winding of
the secondary... so no more "halo".

A PDF document, along with pics will be coming out soon, as
well as a short video, showing the results.

Thanks to all my Tesla List hommies that have provided
such great advice over the months it took to get this done.
(go team!)
---
Reverend Christopher "Fuzzy" Mayeux
Pastor, MSB Ministries





_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla