[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tuning for Class-E Re: [TCML] Tuning SSTC to avoid losing oscillation when I try and draw discharge



I rebuilt the MicroSSTC's driver to Steve Ward's Class-E SSTC schematic.

Using a shielded magnetic loop (which gives output proportional to dI/dt) scope probe on the primary lead suggests the primary is tuned way too high... with the main spike lasting well under 1/10th of the MOSFET turn-off / turn-on time. (the MOSFET gate goes HIGH for 10uS)

This seems odd, as I increased the capacitor value by a factor of 10 in the rebuilding (to 0.01uF), so I figure it should be tuned too low [capacitor taking longer to charge] if anything.

Tripling the number of turns on the primary and playing with coupling didn't change much either.

Any thoughts?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla