[Home][2013 Index] Re: [TCML] Disc Dia. [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Disc Dia.



Tim,

Perhaps a little small, but should work fine.  6 - 8" diameter might be 
more typical to give faster electrode movement (better cooling) and 
shorter dwell time.

What will you fabricate your disc out of?

Dave


On 11/1/2013 3:00 PM, Tim Flood wrote:
> For a SRSG, does anyone foresee any problems with disc diameter of 5.22"
> and a rotating path diameter of 4.46" ? The disc will have four .25" dia.
> electrodes running at 1800 rpm. HV supply will be a 15/60 NST.
>
> Thank you. AT least it's something to talk about.
>
> Tim Flood

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla