[Home][2013 Index] Re: [TCML] Car tire toroid? [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Car tire toroid?



It should work but will be heavy.  You want as smooth a surface as possible
to avoid corona so the tire would not be very good there.

People have used styrofoam wreath blanks to good purpose. (available at
crafting stores such as Michaels)

Dave

> -----Original Message-----
> From: tesla-bounces@xxxxxxxxxx 
> [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Brian Hall
> Sent: Tuesday, November 26, 2013 15:42
> To: Tesla Coil Mailing List
> Subject: [TCML] Car tire toroid?
> 
> 
> I recently had the two front tires swapped out in preparation 
> for the impending winter, and was told that one of the old 
> tires had too much wear for next spring.
> Then it dawned on me - a car tire is basically a toroid!  I 
> drive a simple Toyota Corolla so they are small/average size, 
> weight is really not that much of an issue for the 4" 
> diameter coil form I have.
> Has anyone tried using a car tire with maybe a couple wooden 
> discs to make a closed area, then covering the whole thing 
> with AL tape?If you have, what were the results?  In 
> principle do you think this would be worth trying?
> 
> 
> ----------------------------------
> 
> Brian Hall   
> 
> 
> 
>  		 	   		  
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla