[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TCML] MMC Caps



Hi,
I am building a large OLTC with about a 20uF capacitor.
I want to run about 1200vDC so I can make use of the 3ph power I have available.

I will be using the familiar 940C style of cornel Dublier capacitors all paralleled up to give me the 20uF, but I remember Steve HV recently saying that caps do breakdown after some hours of use if run beyond the AC rating...

The problem is that when we serries them up to increae the voltage rating, it means we need LOTS of caps so more $$$$...

The common cap is 940C20P47K-F, 0.47uF 2000v DC, 550vAC rated... (so I need about 170 caps in serries/parrallel) But there is also a 940C30P15K-F, 0.15uF 3000v DC, but the AC rating is still 550vAC...? (so I need about 130 in parallel.)

Do you think I can RELIABLY run 1200v DC into the 3000v DC caps, or should I just bite the bullet and pay the dollars to serries/parrallel the larger 2000v DC caps?

Thanks,

Carlos
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla