[Home][2014 Index] Re: [TCML] Tips for creating Supports for a flat spiral primary coil [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Tips for creating Supports for a flat spiral primary coil



hmmmm, now that is good idea indeed. 
Ill relay that back to the guys at work 



Cheers, 
John "Jay" Howson IV 


"Why thank you, I will be happy to take those electrons off your hands." 

----- Original Message -----
From: "Jason Johnson" <jasonmsusolar@xxxxxxxxx> 
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx> 
Sent: Tuesday, February 25, 2014 8:52:00 AM 
Subject: Re: [TCML] Tips for creating Supports for a flat spiral primary coil 

For insulating purposes, try printing with a relatively low percent fill 
and then vacuum impregnate the thing with wax or epoxy. Kind of like free 
standing fiberglass mat. 

- Jason 


On Tue, Feb 25, 2014 at 7:36 AM, <jhowson4@xxxxxxxxxxx> wrote: 

> We just printed a 1/4" thick box to protect a transmitter at work, 
> 
> With a 1.5" sphere electrode, it failed at42 kv on a face, and 37Kv on a 
> corner. 
> And once it failed it was pretty much worthless 
> 
> 
> 
> Thanks, 
> John "Jay" Howson IV 
> 
> 
> "Why thank you, I will be happy to take those electrons off your hands." 
> 
> 
_______________________________________________ 
Tesla mailing list 
Tesla@xxxxxxxxxx 
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla