[Home][2014 Index] Re: [TCML] Question on Dummyload-Testing inDCResonantChargingcircuit, similar pursuit [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Question on Dummyload-Testing inDCResonantChargingcircuit, similar pursuit

Hi Stefan, et al,

I watched your video; you do really nice work! I have reconsidered my supply
and suspect it was not intended as a resonance charger, (perhaps a single
charge) at least not for our kind of application. My next step is to
determine if my tube Raytheon 6 pulse is a constant 24KV DC source and if it
has enough power to be a DC Tesla coil supply with a larger or smaller than
resonance cap. Here is a picture of my schematic. This really would make an
awesome looking supply is if can cut the demand on it.
http://www.helpofojai.blogspot.com/

Since I am designing a new RSG I want to rule this beast in or out so the
rotary is optimum and scalable for a pig coils otherwise. Richie's excellent
site jumps to Resonance charging and speaks little to L filtered DC supplies
especially Vacuum tubes. My Raytheon is definitely old school! Anyone?

Jim



-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Teslalabor
Sent: Monday, June 09, 2014 5:22 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Question on Dummyload-Testing
inDCResonantChargingcircuit, similar pursuit

Hi Jim,

my inductor is homemade! It was a lot of work but the results are amazing, 
it performs exactly as predicted. I did a short video which shows my 
charging reactor in detail:

https://www.youtube.com/watch?v=GXT-Vgey1do&list=UUm1yOqvHPOtyktC9lpS3Ffw

Regards,
Stefan

<snip>

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla