[Home][2014 Index] Re: [TCML] Resin or fiberglass perfboard for terry filter? [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Resin or fiberglass perfboard for terry filter?

To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Resin or fiberglass perfboard for terry filter?
From: robert massa <massahbob@xxxxxxxxxxxxx>
Date: Wed, 17 Sep 2014 04:42:50 -0700
Delivered-to: teslaarchive@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sbcglobal.net; s=s1024; t=1410954171; bh=l1msHFxOYlGxzgMRBb7E1dsExyIh4pYO8G3aS8MykyE=; h=References:Message-ID:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=F7SOUZUIxO3W5HFUFlkqd4NEc6Oad2jMNWO/iZpYV9QRxF1fwV3vCtrVcgVN1iNTQxTZdtjZO2NQNQ1VtyyLF0oW3m8anSydK9vCYx4nXr5hfIf8ijG0Z9bpx2sx5DVElhvsj5cTZxIzMyXW5Dfh/RAOnFeomRHuoQ6amUI9nqk=
In-reply-to: <CABopvGegAGwh0od8xG4r7=i25SHmn4x7vk=AaHPuxf+2iZBteQ@mail.gmail.com>
List-archive: <http://www.pupman.com/pipermail/tesla/>
List-help: <mailto:tesla-request@pupman.com?subject=help>
List-id: Tesla Coil Mailing List <tesla.pupman.com>
List-post: <mailto:tesla@pupman.com>
List-subscribe: <http://www.pupman.com/mailman/listinfo/tesla>, <mailto:tesla-request@pupman.com?subject=subscribe>
List-unsubscribe: <http://www.pupman.com/mailman/options/tesla>, <mailto:tesla-request@pupman.com?subject=unsubscribe>
References: <CABopvGegAGwh0od8xG4r7=i25SHmn4x7vk=AaHPuxf+2iZBteQ@mail.gmail.com>
Reply-to: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Sender: "Tesla" <tesla-bounces@xxxxxxxxxx>

asrg doesn't work for nst's. srsg is the only way for nst's. IMHO, BOB


On Tuesday, September 16, 2014 8:26 AM, Brian Gray <armagetto@xxxxxxxxx> wrote:
 


Noob coiler here, putting together components for a 15kv NST SGTC and was
wondering if a $4 Radio Shack resin perfboard would be okay for my terry
filter?  I've noticed a few people using higher quality (or at least I
assume higher quality) fiberglass perfboards and I wondered if it was maybe
because of potential heat issues with the bleed resistors or something like
that.

Brian Gray
Armagetto@xxxxxxxxx
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

References:
- [TCML] Resin or fiberglass perfboard for terry filter?
  - From: Brian Gray

Prev by Date: Re: [TCML] Resin or fiberglass perfboard for terry filter?
Next by Date: Re: [TCML] Resin or fiberglass perfboard for terry filter?
Previous by thread: Re: [TCML] Resin or fiberglass perfboard for terry filter?
Next by thread: Re: [TCML] Resin or fiberglass perfboard for terry filter?
Index(es):
- Date
- Thread