[Home][2015 Index] Re: [TCML] Primary coil spacers for Lexan ( polycarbonate ) circle 17.75" x 0.25" inch thick [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Primary coil spacers for Lexan ( polycarbonate ) circle 17.75" x 0.25" inch thick



With a drill press, you can easily make the spacers. If you don't know anyone with a drill press, I bought a cheap Harbor freight one for the same price you paid for the sole purpose of making mine. I setup a fence and a jig and made them all Identical, then cut each one to get the desired offset for a spiral. Mine look identical to the ones on the third photo. I drilled the holes so more than half of the hole was at the edge, so the tubing would snap into place.

      From: Timothy Gilmore <tdg8934@xxxxxxxxx>
 To: Tesla Coil Mailing List <tesla@xxxxxxxxxx> 
 Sent: Wednesday, February 11, 2015 6:55 PM
 Subject: [TCML] Primary coil spacers for Lexan ( polycarbonate ) circle 17.75" x 0.25" inch thick
   
I purchased this base for my primary base.
http://www.ebay.com/itm/Tesla-Coil-Lexan-Circle-Base-Primary-Secondary-/361162740274?pt=LH_DefaultDomain_0&hash=item5416fa1232

However all I got was just the Lexan circle base (not the primary coil
spacers nor standoffs) as the ad stated. Pictures are great but I need to
look closer next time. Anyway I need to buy or make spacers for the primary
on this see through "bullet proof" base. I don't want to use wood as it
would take away from the clear look of it. Does anyone know of any place
that I can get these from? I don't really have any tools other than a drill
so I would rather buy "reasonably" what would work.

Thanks! - Tim
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla