[Home][2016 Index] Re: [TCML] Why does this work? [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Why does this work?



Could you supply me with a Diagram?
Doug

-----Original Message----- From: jimlux Sent: Tuesday, May 03, 2016 4:53 PM To: tesla@xxxxxxxxxx Subject: Re: [TCML] Why does this work?
On 5/3/16 10:05 AM, doug wrote:
Thank you for your comments Bill; Here is the answer I was looking for.
Doug

1. The C-W multiplier rectifies the AC output from the inverter and
steps up the voltage to a high DC value.

2. The output of the C-W rise is limited by the breakdown voltage of
your spark gap - if you widen the gap, it will fire at a slower rate,
and if you reduce the gap it will fire at a higher rate (per second).

3. When the spark gap fires, the TC primary tank circuit rings like in a
normal TC. The tank circuit capacitance equals the capacitance of each
C-W stage divided by the number of stages.

4. However, the presence of the C-W diodes prevents the stage capacitors
from efficiently ringing, since the C-W diodes effectively short the
caps out when they try to reverse polarity.

5. The result is an inefficient, out of tune TC that has just enough
energy transferred to the secondary to light a nearby fluorescent lamp.


A better strategy (if you don't have a HV transformer) would be to have a CW generator charge a (larger) primary capacitor which would then have the gap and primary inductor. I would suggest using a diode between the CW and the primary cap, otherwise, when the gap fires, you'll have high peak reverse voltage across the CW stack.





_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla