[TCML] capacitors
Tomas Stankevic
Tomas.Stankevic at ff.vu.lt
Mon Dec 3 14:05:20 MST 2007
I'm going to run a 25kW 10kV 3phase pig . I calculated that I need
250nF, voltage will be more than 20 kV (because of 6pulse mode and
resonant charging), so I think 30 kV is the minimum.
What do you mean custom-made cap?
Actually I have lots of capacitors,
Mddeming at aol.com wrote:
>
> In a message dated 12/3/07 1:13:36 P.M. Eastern Standard Time,
> Tomas.Stankevic at ff.vu.lt writes:
>
> ,
> what capacitors would you recommend me to build a 250nF @ 40kV MMC? (for
> DC TC powered by 3phase pig) how much (approximately) it will cost? What
> about shipping to Lithuania?
>
> Tomaš
>
>
>
> Hi Tomaš,
>
> The cost would depend not just on the voltage, but also how much power
> you will be putting through, as power determines the peak current your caps
> will have to handle. Since the CD caps run ~$3.30 each, and you may need
> several hundreds of them, a custom-made cap might be cheaper than an MMC. I believe
> Dr R. may be the best source for truly large caps.
>
>
> Matt D.
>
>
>
>
> **************************************Check out AOL's list of 2007's hottest
> products.
> (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>
>
>
>
More information about the Tesla
mailing list