[TCML] pole xfmr - Information Unlimted

Barton B. Anderson bartb at classictesla.com
Wed Dec 5 20:11:41 MST 2007


Hi DC,

Send Bob the TCML support. These things can happen to any of us at any 
stage in our lives. We have no control over what will be. I work in the 
industry of the mobility impaired and design the electronics to ensure 
both safety and functionality for those in wheelchairs.

My heart goes out to Bob. Many of us on the TCML we'll be praying for 
him. Most of the people who are stuck in a wheelchair did not start out 
in the world this way and it is a challenge for them daily. Just let him 
know he's in our prayers.

Thanks,
Bart

resonance wrote:
>
>
> Bob Ianinni, owner of Info Unltd, will not be back on the list for 
> some time.  He was involved in a very severe auto accident a few 
> months ago that left him paralyzed from the waist down.  He is in a 
> wheel chair, and recently had a heart attack and stroke.  He is not in 
> good shape and may not survive.
>
> I also recently spoke with him regarding the past quality of some of 
> his kits.  He said he is aware of those problems and has now corrected 
> them all. He said every kit they offer has now been built and tested 
> in his lab.  He offers no kits that do not work properly.
>
> Bob also said in many cases people would substitute different parts 
> for the recommended parts in his parts list, and then complain because 
> something didn't work.
>
> I'm not defending any prior non working kits, just bringing everyone 
> on this list up to date on his problems and his attempts to rectify 
> poor past performance of his companies kits.
>
> Regards,
>
> Dr. Resonance
>
> Resonance Research Corp.
> www.resonanceresearch.com
>
>
> ----- Original Message ----- From: "Chris Swinson" 
> <list at future-technologies.co.uk>
> To: "Tesla Coil Mailing List" <tesla at pupman.com>
> Sent: Wednesday, December 05, 2007 6:18 PM
> Subject: Re: [TCML] pole xfmr - Information Unlimted
>
>
>> I brought a lot of plans form them like 15 years or so ago, was not 
>> on the internet much and knew nothing of mailing lists etc, I found 
>> IU and brought a fair few plans, built it and it did not work. Was 
>> the BTC3 plans, also brought many others but never built them. the 
>> ones I did build did not work either.  Eventually found the IRC group 
>> run by Mike Hammer to whom I still remember helped me get my coil 
>> running all these years latter!
>>
>> Chris
>>
>>
>>
>>
>> ----- Original Message ----- From: "Drake Schutt" <drake89 at gmail.com>
>> To: "Tesla Coil Mailing List" <tesla at pupman.com>
>> Sent: Wednesday, December 05, 2007 11:51 PM
>> Subject: Re: [TCML] pole xfmr - Information Unlimted
>>
>>
>> Does the owner of IU not subscribe to the list?  Maybe he'd like to 
>> chime in
>> but I'm going to have to agree with Timka on this one.  Back when I 
>> was a TC
>> noob I bought some plans off of IU and they were first of all TERRIBLE.
>> Secondly, they required you buy most of the components from them
>> (conveniently), and they also gave no real tips as to how to build 
>> some of
>> the parts nor assemble them!
>>
>> my 0.02
>> drake
>>
>> On Dec 5, 2007 4:09 PM, Timka <tomasdoc2002 at yahoo.com> wrote:
>>
>>> Information Unlimited is a well known rip off company that has a nasty
>>> habit of charging unreasonable and enormous fees for trivial plans 
>>> and parts
>>> that you can get elsewhere at the fraction of the cost.
>>>  Also, for those who happened to buy their "plans", by now you would 
>>> know
>>> that they hide certain components under the veil of proprietary 
>>> design such
>>> as simple wood wound chokes and mini transformers which they sell 
>>> for big
>>> bucks but can be made easily if specks are provided (usually 
>>> presented as
>>> part #16546whatever, available from IU for $$$$). This also applies 
>>> pretty
>>> much for every electronic part they sell, and as I understand, they 
>>> make
>>> most of their money by selling to those who are novice to 
>>> electronics, don't
>>> know good sources of parts or don't have time, skills and tools to put
>>> everything together.
>>>  Oh yes, almost forgot, their assembly job sucks. In 1997 I gave our HS
>>> physics teacher catalog and he ordered something out of it 
>>> preassembled, he
>>> had to resend it back because unit looked like it was assembled by a 
>>> blind
>>> handicapped person with hands growing out of his ass.
>>>  I would avoid Information Unlimited like a plague…
>>>
>>>
>>
>> _______________________________________________
>> Tesla mailing list
>> Tesla at www.pupman.com
>> http://www.pupman.com/mailman/listinfo/tesla
>>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>
>
>



More information about the Tesla mailing list