[TCML] Big Maxwell: was: Apology --

[resonance]

Since the current single unit price is $1,695, thats about as low as I can 
go.

DC

Resonance Research Corp.
www.resonanceresearch.com


----- Original Message ----- 
From: "David Rieben" <drieben at comcast.net>
To: "Tesla Coil Mailing List" <tesla at pupman.com>
Cc: "David Rieben" <drieben at midsouth.rr.com>
Sent: Sunday, December 09, 2007 11:09 AM
Subject: [TCML] Big Maxwell: was: Apology -- 


> Hi DC,
>
> Well, I would love to get my hands on that large Maxwell
> but I fear my availability of funds, or lack thereof, would
> likely be a substantial obstacle for me, especially at this
> time of year with Christmas and everything. I have already
> located a source for a couple of unused 0.1 uFd, 25 kV(AC)
> rated Plastic Capacitors pulse caps from a fellow list member
> that was in a less challenging price range for me. Maybe you
> would be willing to give me a price break on the big Maxwell
> since it was probably one of the primary caps for Big Bruiser?
> Maybe we can negotiate off-list? ;^)
>
> David Rieben
>
> ----- Original Message ----- 
> From: "resonance" <resonance at wildblue.net>
> To: "Tesla Coil Mailing List" <tesla at pupman.com>
> Sent: Sunday, December 09, 2007 11:08 AM
> Subject: Re: Apology -- was:Re: [TCML] Q,,question
>
>
>>
>>
>> No offense was taken.   I didn't quite understand your meaning in the 
>> original post.
>>
>> BTW, were you the person looking for some caps --- perhaps the large 
>> Maxwell 0.1 uF  60 kV cap I have?
>>
>> Dr. Resonance
>>
>> Resonance Research Corp.
>> www.resonanceresearch.com
>>
>>
>> ----- Original Message ----- 
>> From: "Yurtle Turtle" <yurtle_t at yahoo.com>
>> To: "Tesla Coil Mailing List" <tesla at pupman.com>
>> Sent: Saturday, December 08, 2007 3:08 PM
>> Subject: Re: Apology -- was:Re: [TCML] Q,,question
>>
>>
>>>I think you and I are being overly sensitive here. I
>>> didn't take your statement any way other than you
>>> intended. I did mean it in a somewhat sarcastic
>>> manner, though I also believe it to be a realistic -
>>> though difficult - way to handle corona on thin
>>> ribbon. I suspect most of us list members have fairly
>>> thick skins, though we keep having new folks show up,
>>> who may not have my sense of humor. I just wanted to
>>> point out that while I consider my suggestion
>>> ridiculous, I didn't mean it to be insulting. It would
>>> be ridiculous for me to try to wind a pig, but Finn's
>>> is truely a work of art. We all remember over eager
>>> newbies who shoot for the impossible. It's probably OK
>>> to tell them if the view doesn't warrant the climb.
>>> However, we also have read about folks who have done
>>> the impossible, so I try not to discourage the
>>> impossible. Conventional wisdom says NEVER try to
>>> drill holes and thread 50 feet of 1/4" tubing through
>>> eight primary supports, but I ignored that and got a
>>> decent looking primary:
>>>
>>> http://www.hot-streamer.com/adam/primary.htm
>>>
>>> Adam
>
>
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>