[TCML] pig Jacobs

[Krohns]

Reply to David Baehr:
Hi David.  The input to my pole pig Jacob's ladder is 237 VAC at about 28 
amps, controlled by a welder.

Response to David Speck:
David Speck is absolutely right about taking great precautions when working 
with so much current!  I consider myself a beginner in HV experimentation. 
It has been the guidance of folks like Gary Lau and Bart Anderson who have 
helped keep me safe.  So, don't be shy to ask if you are not sure.

Reply to Nick:
Good to hear from you Nick!  I've been building a quarter scale Yak 54 
remote control airplane since February but am planning on continuing the 
construction of my large Tesla coil very soon.  Thanks to Bart Anderson, I 
believe that I have a very nice design 
(http://www.halice.com/physics/bigcoil/1BigColor.gif).

Hal in Tucson


----- Original Message ----- 
From: "david baehr" <dfb25 at hotmail.com>
To: "Tesla Coil Mailing List" <tesla at pupman.com>
Sent: Tuesday, November 27, 2007 5:22 PM
Subject: RE: [TCML] pig Jacobs



Great Vid !!!!!!!!!!!!!!!!!!  what was your input to da pig ?  :-0> From: 
2halice at cox.net> To: tesla at pupman.com> Subject: Re: [TCML] pig Jacobs> Date: 
Tue, 27 Nov 2007 15:31:14 -0700> CC: > > Here's a link to my piggy ladder: 
http://www.halice.com/physics/piglad1.wmv.> It's a 7200 volt pig @ 15KVA.> > 
Cordially, Hal in Tucson> > > 
_______________________________________________> Tesla mailing list> 
Tesla at www.pupman.com> http://www.pupman.com/mailman/listinfo/tesla
_________________________________________________________________
Your smile counts. The more smiles you share, the more we donate. Join in.
www.windowslive.com/smile?ocid=TXT_TAGLM_Wave2_oprsmilewlhmtagline_______________________________________________
Tesla mailing list
Tesla at www.pupman.com
http://www.pupman.com/mailman/listinfo/tesla