[TCML] Pig SISG: Destroying the Indestructible

[FIFTYGUY at aol.com]

In a message dated 4/1/08 7:31:49 P.M. Eastern Standard Time,  
mike8675309 at gmail.com writes:

>>    A strike rail wouldn't have done much good -  I'm  getting a lot of
>>  strikes that curve *under* the  primary to hit components. I put  steel 
sheets along...

>In  such a case, would there be any value to creating a strike rail in
>an  unexpected location, i.e. below the primary, and above  the
>components?


    I believe so, but in that area I can get away with  a "strike box" 
enclosing everything which affords more protection!
 
-Phil LaBudde

Center for the Advanced Study of Ballistic  Improbabilities



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)