[TCML] using larger secondary wire for the base

[Henry Hallam]

I usually do exactly as you suggest, both for the top and bottom of the 
coil, and haven't had any problems.

Henry

Scott Bogard wrote:
> Hey all,
>      Quick question, I was trying to figure out a better way to attach 
> my secondary to my ground and I thought of an idea.  Basically there is 
> a danger of snapping off the secondary wire if I solder a heavier cable 
> directly to the thin 22 AWG wire, unless I wrap a few turns of the 
> heavier wire around the base and secure it so that I can solder them 
> together and have no fear of the joint breaking in case something gets 
> jiggled.  Is this a bad idea, I don't really see how, but I've never 
> heard of anyone actually doing this.  Assuming I use two turns or so the 
> inductance change should be negligible.  Thanks.
>
> Scott Bogard.
>
>
> _________________________________________________________________
> Get in touch in an instant. Get Windows Live Messenger now.
> http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_getintouch_042008_______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>