[TCML] primary coil

[Yurtle Turtle]

Years ago, I soldered mine together:

http://www.hot-streamer.com/adam/primary.htm

If you look at the "Northeast" quadrant, approximately six turns from the outside, you can see where I spliced my 1/4" tubing, as I could only find 50 foot rolls locally. I used a piece of solid copper wire that fit snugly inside the wire. The I sweated it and cleaned it off real good. The flux will turn the copper green if it isn't cleaned up.

Adam


--- On Tue, 4/29/08, douglas smith <eyemfedup2 at yahoo.com> wrote:

> From: douglas smith <eyemfedup2 at yahoo.com>
> Subject: [TCML] primary coil
> To: tesla at pupman.com
> Date: Tuesday, April 29, 2008, 7:06 PM
> you have told me i need to extend my primary coil to 15
> turns
>    
>   can i solder the extra coil on or will that lower the
> performance of my tc
>   also any sugestions on how to hipe it up abit i was
> hopeing to get 3 to4 foot streamers
>   possibley piggybacking another nst in paralell or
> something
> 
>        
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo!
> Mobile.  Try it now.
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ