[TCML] PC boards

[BunnyKiller]

Hy Scott,

Radio Shack used to sell a packet of rub on transfers for PC boards, 
comes with lines, curves, pads, etc.
You apply the rub-onz and then soak board in the etchant. Be sure to 
drill all holes before applying the rub-onz.

another thought ( not tried) is automotive pin striping tape..... lots 
of widths and pretty colors too :)


Scot D



Scott Bogard wrote:

>Hey all,
>     A tiny bit off topic but still useful for some of us to know, I 
>have come across a need to make a printed circuit board, my research 
>tells me that I need a program to make a design, and then I need to 
>print it on a transparent sheet, and use a iron to adhere the image 
>and....  This is too complicated, the board will have like 5 or 6 parts, 
>can I just "draw" the paths I want by hand with something like 
>fingernail polish (or a sharpie marker), on a copper clad board, and 
>etch the copper away with ferric chloride?  That would be ideal.  You 
>may respond off list if you so desire.
>
>Scott Bogard.
>
>
>_________________________________________________________________
>Helping your favorite cause is as easy as instant messaging. You IM, we give.
>http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join_______________________________________________
>Tesla mailing list
>Tesla at www.pupman.com
>http://www.pupman.com/mailman/listinfo/tesla
>
>  
>