[TCML] top load and photography (tripod grounding)
bartb
bartb at classictesla.com
Tue Mar 4 20:15:52 MST 2008
Hi Peter,
This is what son's are for. I handle the coil. My son handles the
camera. The camera and my son are electrically connected before the coil
starts running. I'm free to do my thing. A second person really helps
with camera's and coils (son or whoever).
Take care,
Bart
Peter Terren wrote:
> In truth I rarely push the on button these days. I use the standard
> or long range IR remote to avoid camera shake.
> If I am working alone then I am also controlling the variac and am
> grounded to the metal handle but this is well out of harms way. If I
> am using the camera manually then I will be behind the camera and
> tripod and there will be very little pickup of HV from my body.
> Peter
> www.tesladownunder.com
>
> ----- Original Message ----- From: "S&JY" <youngs at relia.net>
>
>> Peter,
>>
>> There is still the danger of you acting as an antenna, so that when you
>> touch the grounded camera the difference in potential between it and you
>> could be enough to damage the camera. Wearing a ground strap connected
>> through a string of a dozen or so 1 meg resistors to ground, or
>> holding onto
>> the tripod with one hand, would make your body potential be closer to
>> that
>> of the camera, thus avoiding damaging "tingles".
>> --Steve Y.
>>
>> -----Original Message-----
>> From: tesla-bounces at pupman.com [mailto:tesla-bounces at pupman.com] On
>> Behalf
>> Of Peter Terren
>> Sent: Monday, March 03, 2008 7:46 PM
>> To: Tesla Coil Mailing List
>> Subject: Re: [TCML] top load and photography (tripod grounding)
>>
>> That was me. I do it because I was sometimes getting a little tingle
>> when I
>> touched the camera when I am standing behind it suggesting the camera is
>> above earth potential. I don't want that voltage sparking onto the
>> screen or
>>
>> eyepiece or plastic on button which could damage the camera.
>> If you are trying to avoid "unseen leaders" then you are expecting the
>> camera to be floating at many thousands of volts. Not safe at all.
>> Secondly, if there was a camera strike while I was holding the camera (I
>> don't get that close), then I would be protected and not the path to
>> ground.
>> I stand by my decision to earth the tripod.
>>
>> Peter
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>
>
More information about the Tesla
mailing list