[TCML] Mmc

[Mddeming at aol.com]

Hi Ruben,
 
A little arithmetic will show this is a trivial problem. For illustration,  
let's assume three strings of 10, 10 meg resistors each and a 10 kV /60  mA 
supply. Each resistor sees a voltage drop of 1 kV max. Power dissipated  in each 
one is E*E/R =100 mW, or 3 watts peak power for the whole MMC. Out  of 600W, 
that's 0.5% peak.
 
Matt D.
 
 
 
 
In a message dated 3/26/08 10:39:29 P.M. Eastern Standard Time,  
rmferaligator at aol.com writes:

I am  building an mmc to replace my salt water cap, and I am curious are 
bleeder  resistors really necessary?
Won't they hurt output  wattage?

Cheers
Reuben 
Sent from my Verizon Wireless  BlackBerry
_______________________________________________
Tesla mailing  list
Tesla at www.pupman.com
http://www.pupman.com/mailman/listinfo/tesla







**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)