[TCML] javatc

[douglas smith]

Secondary Coil
  23 = Height 1
44.8085 = Height 2
  
Primary Coil
  23 = Height 1
23 = Height 2
    ok my question is if secondary H1=23 and Primary H1 and H2 are 23 
    that does not seem to hold in account primary wire dia. and the fact that 
    the primary wire will be lifted .25 to .05 by spacers.
    couplling coefficient is .002 of recomended.
    am i looking at this right.
    i used demo coil and changed sec. wire dia. and turns and Primary cap.
    it was so close to what i wanted
    it does seem to hold in account the extra tube between sec. H2=44.8085
    and middle of toroid 46.8085.
   toroid  minor=4, major=16, height=46.8085,
    Disc #1: inside=0, outside=8, height=46.8085, topload
        THANKS