[TCML] capacitors

[DC Cox]

the .03 Maxwells have been used with mixed results.  They are not designed
for 120 pps so you will be pushing them a bit.

For nst operation I prefer MMC caps in paralled strings of 16 pcs. so .009
uF per string, then parallel them.

3 par strings = .027 uF which is close enough.

Dr. Resonance



On Wed, May 21, 2008 at 4:19 PM, douglas smith <eyemfedup2 at yahoo.com> wrote:

> i was wondering 2 things
>  first, i have recenty run accross a 35 kv .03 uf pulse capacitor for 99.00
>  would it be better to use one like this or to use mmc combination ?
>  not sure but looks to me that it will cost about the same.please correct
> me if i'm wrong.
>  target cap .03uf
>
>
>  secondly, as for spark length on javatc i get the same results with a nst
> 7.5/60 as i do
>  with a 15/30
>  please explain
>  as always thanks
>
>
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla
>