[TCML] Resources

[BunnyKiller]

Hey Carey...

I just happen to have about 10 lbs of #24 ( spool included in weight) 
that I might be interested in letting go for a reasonable price + 
shipping. ( 7.50$ a lb? still cheaper than Rib eye steak, and will last 
longer too, wont turn to poop in 16 hrs.)

doing a quick javatc run on the wire weight shows approximately 7700 
feet weighs in at 9.5 or so lbs, considering that the spool probably 
weighs about 1/2 - 3/4 lbs ( even if that much cuz its plastic) Im going 
to say there is about 7400 - 7600 feet of wire left on the spool.

Let me know if you are interested....

Scot D





Carey T. Waldrop wrote:

>Anyone have resource ideas for enameled copper winding wire?
>Just went to my local electronic parts store and was shocked to find
>Cu is way up @ $133/100yds of 24AWG. After reading about oil insul$
>this hobby is already getting expensive. I guess the times of making
>this stuff out of practically scrap are gone. I was fortunate along the way
>to collect a neon transformer and other key parts. 
>
>CareyW
>_______________________________________________
>Tesla mailing list
>Tesla at www.pupman.com
>http://www.pupman.com/mailman/listinfo/tesla
>
>  
>