[TCML] Panasonic .056Uf MMC (Terry's early prefered cap choice)
wavetuner at gmail.com
Mon Nov 24 17:10:59 MST 2008
I have 2 banks of .056uf x16 (25.6KV) x3 ~=.01UF@ 25.6KV double sided or
.02uf total. These are mounted on g10 or equiv perf board PCB's from
Digikey. This would be an ideal setup for a 15KV 60ma Neon or? They have
extended lead length as Terry did on his prototype and twist and solder
bleed resistors. The two boards are mounted with standoffs on either side of
a PE cut board (voltage paralleled) to be mounted in any dimension,
vertically will afford the best cooling. These have seen very little use.
I have gone to Maxwell's and General Atomics as my coils grew up ;-))
Please contact me off list if interested.
More information about the Tesla