[TCML] VTTC Curent Draw

[S&JY]

Phillip,

What you measured and plotted is very typical for MOTs.  The moral of the
story is, for those who use MOTs, keep the maximum primary voltage below 95
to 100 volts to keep the core losses and heating low.

--Steve Y.

-----Original Message-----
From: tesla-bounces at pupman.com [mailto:tesla-bounces at pupman.com] On Behalf
Of Phillip Slawinski
Sent: Wednesday, September 24, 2008 5:17 PM
To: Tesla Coil Mailing List
Subject: Re: [TCML] VTTC Curent Draw

I measured idle current draw on my transformers.

http://www.flickr.com/photos/pslawinski/2885535771/sizes/o/