[TCML] 60ma Coil Discharge - comments welcome
resonance at wildblue.net
Sat Sep 27 15:08:09 MDT 2008
strike rail appears to be too high up sec.
usually 1 inch outside pri and 1.5 inch vertical elev above pri works well.
the burn spot on the coil may be caused by handling the coil without gloves
on --- sodium salts from the sweat in your hands.
On Sat, Sep 27, 2008 at 7:14 AM, Stephen J. Hobley <shobley at userfs.com>wrote:
> This is a picture of our coil with the 'new' 60ma NST with 135uF run
> You can see one of the flashes (possibly caused by lint) and a strange
> corona running like 4 searchlights from the top of the strike rail
> supports (insulated) up to the toroid - we've never seen that before -
> anyone know what is causing it?
> I'll clean and varnish the coil and take another picture when it's
> Tesla mailing list
> Tesla at www.pupman.com
More information about the Tesla