[TCML] Twin coils primary lead design

[Peter Terren]

You zig-zagged the boards but had long thin lead in wires! A very neat coil 
though especially with the snazzy ribbon primary and seems to work fine.

No pictures up yet as my site is in a state of flux behind the scenes trying 
to get from Frontpage to a more modern design.

Peter www.tesladownunder.com

----- Original Message ----- 
From: "bartb" <bartb at classictesla.com>
To: "Tesla Coil Mailing List" <tesla at pupman.com>
Sent: Tuesday, August 04, 2009 8:53 AM
Subject: Re: [TCML] Twin coils primary lead design


> Hi Peter,
>
> Yeah, probably a good idea to zig-zag the boards. I did that on my sisg.
> http://www.classictesla.com/photos/sisg/sisg.html
>
> BTW, do you have any pics up yet? Couldn't find anything at your site on
> the sisg.
>
> Take care,
> Bart
>
>
> Peter Terren wrote:
>> My other source of inductance is that 4 boards of the SISG are about 2
>> feet long. Perhaps I should put these inside a coax. Hopefully,
>> zig-zagging the current path will minimise this without compromising
>> cooling.
>>
>> Peter www.tesladownunder.com
>>
> _______________________________________________
> Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla