[TCML] ARSG Materials continued

[Kurt Schraner]

Excuse: "you guys show some supporting data...", have been shown IMHO:

http://www.laushaus.com/tesla/primary_resistance.htm

...did you really read Gary Lau's careful investigation? What you need more, 
for practical application?

Regards, Kurt

BTW: My SRSG's have an Al ring, supporting the tungsten rotating electrodes, 
as well as Al supporters for the fixed electrodes. See i.E.
http://home.datacomm.ch/k.schraner/rotary.htm
http://home.datacomm.ch/k.schraner/TramEq07.jpg


Andrew Robinson wrote:
> Ok... thanks for all your replies... but now I have conflicting
> opinions. One says yay Al and another says boo Al. Can you guys show
> some supporting data so I can make the final decision on which
> material to use. FYI in case you didnt look at our engineering
> diagrams, the Al will only be used for the conducting ring and
> electrode supports. The actual electrode electrodes are .25"
> tungsten. Look at the diagrams and note the materials at the bottom
> of the designs. Thanks, Andrew
> _______________________________________________ Tesla mailing list
> Tesla at www.pupman.com
> http://www.pupman.com/mailman/listinfo/tesla