[TCML] Primary Coil Copper Saving Idea

[bartb]

jimlux wrote:
> I suspect if you were to talk to a motor rewinding shop in your local 
> area that does a lot of work (so they're always buying new wire, and 
> following the spot price, as a result), it would be the optimum scheme.

I would agree. There is a business a couple blocks away that sells 
magnet wire to local rewind shops. The last 10 lb spool I purchased was 
$53, but it's been quite a while since I purchased it. Last year I 
purchased some wire off of eBay on two separate occasions. One spool was 
fine, but the other was under weight. And thus the problem with eBay 
purchases of wire (you don't know until it's in your hot little hands).

Bart