[TCML] JAVATC - Question
bartb at classictesla.com
Sun Mar 15 10:10:20 MST 2009
It might do ok. The only way is to know is to try. What I do suggest
regarding the gap distance is to ensure you set the gap up correctly by
taking the gap and transformer aside and setting the gap up without
anything else connected. This is the only way I know of to ensure the
gap is set properly.
otmaskin5 at aol.com wrote:
> Thanks Bart.? I think I got it now.? I try playing with the variations as you suggest to get a feel for the differet size-geometry relationships.
> One other question, you mentioned the drawer knobs tend to heat up and are tough to cool.? I will be using air blast for cooling & quenching.? I removed the motor/fan from a vac from an old vacuum cleaner which seems to put out a pretty intense airflow out of a 1" X 2" opening.? Do you think this would?be sufficient to?handle the cooling need?? I hear of a lot of guys using brass bar stock in these gaps which I would think have similar heat issues.?
More information about the Tesla