[TCML] JAVATC PFC Query

[BunnyKiller]

Hey Phil...

Assuming that you have the 3 NST's in paralell and the line feeding them 
would see the current/voltage phase shift in total, I would put the 86 
uF caps in line before the load...  for some reason, I feel that if you 
put the 30ish uF caps on each trannie, each sucsecive trannie will 
impact the next in line...  but thats just my theory....
see what the other members have to say before taking my advice ;)

Scot D



Phil Tuck wrote:

>Hello.
>
>JavaTc gives the PFC value that is required based on the transformer
>information you have entered. In my case I have entered 10,000v 150 m/a and
>it gives 86uF (240 volts (50hz). But I am not using one single transformer
>supplying this, as the program presumes. Instead I have three NST's each of
>50m/a in parallel. So do I put a 86uf across the three ? or single 29uF caps
>across each NST? Or either?
>
> 
>
>Regards
>
>Phil
>
> 
>
>     
>
> 
>
> 
>
> 
>
>_______________________________________________
>Tesla mailing list
>Tesla at www.pupman.com
>http://www.pupman.com/mailman/listinfo/tesla
>
>  
>